Fujitsu D943 - Processor Replacement

Replacing the processor Add-on modules
A26361-D943-Z120-14-7619 53
Replacing the processor
3
2
1
A
4
5
Ê Push the lever in the direction of the arrow (1) and lift it as far as it will go
(2).
Ê Remove the old processor from the socket (3).
Ê Insert the new processor in the socket so that the mark on the upper side of the
processor matches the mark (A) on the socket (4).
!
Themarkonthe
p
rocessor ma
y
be covered b
y
a heat sink. In this case le
t
y
ourself be
g
uided b
y
the markin
g
in the rows of
p
ins on the underside of
the
p
rocessor.
Ê Push the lever back down so that it snaps into place.
Ê Set the switches 1, 2 , 3 and 4 depending on the processor which is installed.
!
If
y
ou want to re
p
lace the
p
rocessor, contact
y
our sales outlet or our
service center, since
y
ou ma
y
re
q
uireavolta
g
e converter.