Fujitsu D943 - Energy Saving Functions

Settings in BIOS Setup Power - power-management features
40 A26361-D943-Z120-14-7619
Power menu - Setting energy saving functions
Programs for power management (e.g. POWER.EXE) can change the settings for the
energy saving functions.
You can set the following functions in the
Power menu:
• Enabling of APM interface (in the
Advanced Power Management field)
• Extent of energy saving functions (in the
Power Management Mode field)
• Standby mode (in the
Standby Timeout field)
• Suspend mode (in the
Suspend Timeout field)
• Hard disk energy saving functions (in the
Hard Disk Timeout field)
• Processor speed in standby mode (in the
Standby CPU Speed field)
• Save system status (in the
Save To Disk field)
• Defining system activities (in the
Wakeup Event field)
Phoenix BIOS Setup
Main Advanced Security
Power BIOSFaX Exit
APM [Enabled]
Power Management Mode: [Customize]
Standby Timeout: [15 min]
Suspend Timeout: [10 min]
Hard Disk Timeout: [10 min]
Standby CPU Speed: [Medium]
Save To Disk: [Disabled]
Ê Wakeup Event
Item Specific Help
——————————————————————
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← → Select Menu Enter Execute Command F7 Previous Values
Example for menu Power
APM - Enabling the APM Interface
Determines whether an operation system can change the power management
settings in the system BIOS.
Enabled The operating system has access to the power management settings
and can change these if necessary (default entry).
Disabled Changes can not be made to power management setting by an
operating system.