Fujitsu D943 - Second-Level Cache Upgrade

Add-on modules Upgrading the second-level cache
54 A26361-D943-Z120-14-7619
Upgrading the second-level cache
The system board has a socket for second-level cache. You can install a Pipelined-
Burst second-level cache module with 128 Kbytes, 256 Kbytes or 512 Kbytes.
!
To avoid dama
g
etothes
y
stem board onl
y
cache modules released b
y
Siemens Nixdorf should be used.
1
2
1 = Installing second-level cache 2 = Removing second-level cache
Ê If a second-level cache is already installed, pull it out of the mounting location
in the direction of the arrow (2).
Ê Insert the new second-level cache module into the mounting location, making
sure it snaps into place (1).
i
To be able to use the second-level cache,
y
ou must set the Cache field
in the
Advanced / Cache Memory menu of the BIOS Setup to Intern and
Extern
. You can enhance the
p
erformance b
y
settin
g
the Cache System
BIOS Area
and Cache Video BIOS Area fields in the same menu to
Enabled and co
py
in
g
ROM sections with Cache memory regions to the
cache.
Removing second-level cache modules
Ê Pull the second-level cache module out of the mounting location in the
direction of the arrow.
Upgrading the video memory
If your system board is supplied with a video memory configuration of 1 Mbyte,
youmayenlargethevideomemoryupto2Mbytes.