Fujitsu D943 - Page 51

Power Settings in BIOS Setup
A26361-D943-Z120-14-7619 43
The Enabled setting only works with:
• Controllers integrated on the system board (e. g. graphics and audio
controllers)
• Add-on boards indicated in the price list.
Other add-on boards are not supported at present.
!
Do not set the entr
y
in the Save to Disk field to Enabled,if
y
ou are usin
g
boards other than those listed above. This a
pp
lies, for exam
p
le, to add-on
boards such as SCSI controllers and
g
ra
p
hics controllers.
These restrictions also a
pp
l
y
if
y
ou activate the Quickstart function (Save
to disk) under Windows usin
g
DeskEnergy.
Before startin
g
the Save to Disk function,
y
ou should first close all
documents located on network drives.