Fujitsu ETERNUS AF Series - Page 52

Chapter 4 Connection and Settings
4.2 Turning on the Power Synchronized Unit
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
52
End of procedure
CAUTION
Do
• Ensure the power plug is fully inserted into the socket. Failure to do so
may cause electric shock or fire.
• Do not use the server service outlet to connect the power cord for the
power synchronized unit.
• Do not overload electrical sockets. Doing so may cause electric shock or
fire.
Unplug
• When unplugging the power cord, hold the plug. Do not pull on the
cord. Pulling the cord may expose or snap the inner wires, which may
cause electric shock or fire.
• When the power synchronized unit is not used for a long period of time,
unplug all power plugs. Failure to do so may lead to fire.