Fujitsu Eternus DX600 S3 - Page 115

2 [New Simple Volume Wizard] appears. Click the [Next] button.
3 Without changing the default settings of [Specify Volume Size], click the [Next] button.
4 Assign a drive letter in [Assign Drive Letter or Path] and click the [Next] button.
Chapter 6
SAN Connection Settings
6.2 Server Connection Setup
115
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0