Fujitsu Eternus DX600 S3 - Powering on; Switching on and off the Main Line Switch on the Power Distribution Unit; Figure 3.3 on Position (Marked |) of the Main Line Switches on a 1 U Power Distribution Unit; Figure 3.4 on Position (Marked |) of the Main Line Switches on a 2 U Power Distribution Unit

3.1 Powering On
This section explains how to turn on the ETERNUS DX.
3.1.1 Switching On and Off the Main Line Switch on the Power Distribution Unit
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
● For 1U
Figure 3.3 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
● For 2U
Figure 3.4 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Chapter 3
General Settings
3.1 Powering On
36
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0