Fujitsu Eternus DX600 S3 - Chapter 8 System Status Check; Component Status Check

Chapter 8
System Status Check
Check the status of the ETERNUS DX on the ETERNUS Web GUI screen or ETERNUS CLI.
8.1 Component Status Check
The status of the ETERNUS DX can be checked by general status in the upper left of the ETERNUS Web GUI
screen.
When the general status image is " ", the ETERNUS DX is in normal status. When the general status
image is other than " " (" ", " ", etc.), an abnormality has been detected in the ETER-
NUS DX. Check the status of each component on the [Storage] screen.
If there is a component in Warning or Error status, contact your sales representative or maintenance engi-
neer.
129
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0