6 Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 1, Name: sdv0" volume.
7 Check the displayed information, and then click the [Start] button.
8 In the confirmation screen, click the [OK] button.
The SnapOPC+ session starts.
9 Click the [Done] button to return to the [Advanced Copy] screen.
Chapter 7
Advanced Copy Settings
7.2 Performing a Copy (SnapOPC+)
125
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0
To Next Page
Loading...
