Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
134
● Security features
Figure 5.3 Security features
Connection from an AIS Connect agent to the AIS Connect server can be set up via a SOAP message that is
based on HTTPS. Access can only be initiated by an AIS Connect agent at the ETERNUS DX Disk storage
system site of the customer as illustrated by the diagram above. The AIS Connect server offers a certificate
and the AIS Connect agent verifies this certificate for every connection setup. All transferred data is
protected against spy-out and manipulation.
For setup procedure for remote support (by AIS Connect), refer to "5.2.5.1 Remote Support (by AIS Connect)
Setup" (page 135).
■ REMCS
For setup procedure for remote support (by REMCS), refer to "5.2.5.2 Remote Support (by REMCS) Setup" (page
136).
The following sections explain how to set the ETERNUS DX Disk storage system for remote support.
For details on the settings, refer to "ETERNUS Web GUI User's Guide".
In some regions, the usage of AIS Connect is limited to contract customers.
Contact the Support Department for details.
ETERNUS DX Disk storage system
behind a firewall
AIS Connect server
Firewall
Allowed
Rejected