EasyManua.ls Logo

Fujitsu Eternus DX90 S2 - show enclosure-status

Fujitsu Eternus DX90 S2
147 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Components
2.1 Controller Enclosure
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
34
Host interfaces
A host interface is a board that has interface ports to connect a controller to the server.
There are six types of host interfaces: FC 16Gbit/s, FC 8Gbit/s, iSCSI 10Gbit/s, FCoE, iSCSI 1Gbit/s, and SAS.
FC, iSCSI 10Gbit/s, FCoE (for FC cable connection)
Figure 2.12 Host interface (FC, iSCSI 10Gbit/s, FCoE (for FC cable connection))
Part explanation
- Host interface ports (FC, iSCSI 10Gbit/s, FCoE (for FC cable connection)) (from left to right: Port#0 and
Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the Dual LC connectors to connect FC cables.
Port#0 Port#1 Port#0 Port#1
FC, iSCSI 10Gbit/s, FCoE
Installed host interfaces in the controller
Host interface (CA#0) Host interface (CA#1)

Table of Contents

Other manuals for Fujitsu Eternus DX90 S2

Related product manuals