Fujitsu Eternus DX90 S2 - Figure 2.13 Host Interface (Iscsi 10 Gbit;S, Fcoe (for Copper Twinax Cable Connection)); Figure 2.14 Host Interface (Iscsi 1 Gbit;S)

Chapter 2 Components
2.1 Controller Enclosure
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
35
● iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection)
Figure 2.13 Host interface (iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection))
• Part explanation
- Host interface ports (iSCSI 10Gbit/s, FCoE (for Copper Twinax cable connection)) (from left to right:
Port#0 and Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the connectors to connect Copper Twinax cables.
● iSCSI 1Gbit/s
Figure 2.14 Host interface (iSCSI 1Gbit/s)
• Part explanation
- Host interface ports (iSCSI) (from left to right: Port#0 and Port#1 in CA#0, Port#0 and Port#1 in CA#1)
These are the RJ-45 connectors to connect LAN cables.
Port#0 Port#1 Port#0 Port#1
iSCSI 10Gbit/s, FCoE
Installed host interfaces in the controller
Host interface (CA#0) Host interface (CA#1)
iSCSI 1Gbit/s
Port#0 Port#1
Host interface (CA#0) Host interface (CA#1)
Port#0 Port#1
Installed host interfaces in the controller