Fujitsu Eternus DX90 S2 - Page 86

Chapter 4 Connecting Cables
4.5 Power Cord Connection
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Installation-
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0
86
● For Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures connection)
3 Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power cord clamps removed in Step 1.
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
Controller Enclosure
Drive Enclosure 7
Drive Enclosure 6
Drive Enclosure 5
Drive Enclosure 4
Drive Enclosure 3
Drive Enclosure 2
Drive Enclosure 1
PSU#1 InletPSU#0 Inlet
PSU#0
Inlet
PSU#1
Inlet
: Connect between the OUTn of the power distribution unit #0
and the PSU#0 inlets of the ETERNUS DX Disk storage
: Connect between the OUTn of the power distribution unit #1
and the PSU#1 inlets of the ETERNUS DX Disk storage
Power distribution unit #1
Power distribution unit #0