4.3 Installing FUJITSU ISIS Scanner Driver
fi-5000N Operator’s Guide 33
Installing and Setting Driver
4
4.3 Installing FUJITSU ISIS Scanner Driver
■ Preparation
Before starting the installation, prepare the Setup CD-ROM
■ Installing
1. Turn on the power of the PC, and log on to Windows.
2. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
ATTENTION
• Although the scanner is bundled with its own scanner driver, to connect
the scanner to this product, you must use the scanner driver bundled with
this product.
• We recommend you to check our website for the latest version of this
driver.
Our site is:
http://www.fujitsu.com/global/support/computing/peripheral/scanners
HINT
Windows XP screenshots are used in this section as examples. The
windows and operations may slightly vary depending on your OS.
ATTENTION
When using Windows 2000 or Windows XP, log on as a user with
"Administrator" rights.
ATTENTION
This screen may not appear when the "Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or
"My Computer".
To Next Page
Loading...
