Fujitsu FP-1000 - 3. Paper Specifications; 3-1. Paper Width; 3-2. Paper Thickness; 3-3. Paper Roll

− 4/83 −
3. Paper Specifications
Only use the thermal paper roll specified below.
3-1. Paper Width
• 80mm paper
0
0.1
80

mm
• 58mm
paper
0
0.1
58

mm
3-2. Paper Thickness
• 65 - 85 μ m
3-3. Paper Roll
• Outside diameter: φ83mm or less
• Core diameter: φ12±0.5mm (inside) / φ18±0.5mm (outside)
• Printing surface:
outer surface of the roll
• Treatment of end of paper: The roll paper must not be glued to the core.
The end of the paper must also not be folded
back.
Caution: Do not use rolls that have rough sides or sides from which
pieces of paper extrude. Such paper may cause unstable
paper feeding, resulting in printer trouble.