− 14/83 −
Built-in Power Supply Model
(1) Connect the power connector to the AC inlet.
Power Cable
AC Inlet
Warning: Use only the specified AC power cable with specifications based on
national regulations.
Caution: Before connecting the power cable, turn off the power
switches on the printer and all the devices connected to the
printer. Also, remove the plug of the power cable from the
outlet.
Caution: Perform power cable connection with the device placed
vertically for easy operation.
Caution: If the device is installed vertically, use a right-angled power
cable.
(2) Insert the plug of the power cable into the outlet.
To Next Page
Loading...
Need help?
General