Fujitsu FP-510 - Page 120

119 / 125
No.
Item
Explanation
Detail setup item
10
LOW POWER
- Setting for reducing power
consumption.
MODE1:Reduction of about 10%
MODE2:Reduction of about 30%
NORMAL
MODE1
MODE2
11
TOF AT AUTO
LOGO
* only FP-510II
-The top blank when an automatic logo
is printed is set.
1.5mm 4.5mm 11.5mm
12
RETURN TO UP
- Returns to the selection mode for the
setup group items.
-
13
RETURN TO
SETUP MENU
- Returns to the setup menu.
-
(3) SERIAL INTERFACE CONDITION setup items
No.
Item
Explanation
Detail setup item
1
BAUDRATE
- Baud rate.
2400BPS 4800BPS
9600BPS 19200BPS
38400BPS 57600BPS
115200BPS
2
FORMAT
- Data format.
7EVEN1 7ODD1
8NONE1 8EVEN1
8ODD1
3
PROTOCOL
- Buffer control protocol.
XON/XOFF
DSR/DTR
4
RETURN TO UP
- Returns to the selection mode for the
setup group items.
-
5
RETURN TO
SETUP MENU
- Returns to the setup mode.
-
(Note) This group is not displayed in the case of Bluetooth and USB interface model.