First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains a dapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
memory module.
► Switch on your device.
► During installat
ion, follow the instructions on screen.
If a Windows ope
rating system is installed on your device, you will find more
information on
the system and drivers, help programmes, updates, manuals etc. on
the device or o
n the Internet un der "
http://www.fujitsu.com/fts/suppo r t/".
You can find inf
ormation and help on the Windows operating system functions
on the Intern
et at "
http://window s.microsoft.com" .
Fujitsu 21
To Next Page
Loading...
