Removing and installing comp onents
during servicing
Installing a m emory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Installing and rem oving an M.2 module
(configuration dependent)
Your LIF EBO OK is equipped with a service compartment for an M.2 module.
The LIFEBOOK E4411 is shown below. The procedure is identical for all
variants. Differences are pointed out accordingly.
Installing an M.2 module
21
► Inser
t the M.2 module at a slight angle in the direction of the arrow (1)
into t
he slot on the mainboard.
► Fasten the M .2 module in place in the slot with the screw (2).
Fujitsu 67
To Next Page
Loading...
