Working with the notebook
Connecting the notebook to the Thunderbolt™ Port Replicator
2
1
► Connect one e
nd of the supplied Thunderbolt cable (USB Type-C) to the
Thunderbol
t port on the notebook (1).
► Connect the other end of the Thunderbolt cable (USB Type-C) to the Thunderbolt port for
data connection and power supply (USB Type-C) on the port replicator (2).
Use only the Thunderbolt cable supplied with your Thunderbolt™ Port
Replicator for the connection from the notebook to the Thunderbolt™ Port
Replicator in order to ensure an error-free connection.
When the notebook is connected to a Port Replicato r, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will b e loaded, as
soon as th e notebook is connected to a Port Replicator of the same typ e.
50 Fujitsu
To Next Page
Loading...
