Removing and installing comp onents
during servicing
Attaching the cover
2
1
2
► Place the cover in the correct mounting position (1).
► Tighten the scre
ws (2).
The LIFEBOOK E4
411 has 2 screws and the LIFEBOOK E4511 3 screw s.
► Complete the installation, see "
Finishin g component removal", Page 69.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 38).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the ca bles that yo u disconnected before.
Fujitsu 69
To Next Page
Loading...
