Tro ubleshooting and tips
The notebook stops w orking
NotebookEnergysavingmode
Cause Troubleshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme has
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The batte ry is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
► Check that the data c able connecting
the notebook to the printer is p roperly
connected.
The printer driver is faulty or not correctly
installed, or it is th e wrong printer driver.
► Check that the data c able connecting
the notebook to the printer is p roperly
connected.
► Check whethe
r th e correct printer driver is
loaded (ref
er to the printer documentation).
The wireless connection to a network does not work
Thewire
lessconnection toanetw orkdoesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the wireless compon ent on (see
"
Switching the wireless components on an d
off", Page 45).
The wireless component is enabled. Despite
this, the wireless connection to a netwo rk does
not work.
► Check whe ther the wireless connection is
switched on via the software.
► Furthe
r information on using the wireless
compo
nent can be found in the help files.
Fujitsu 79
To Next Page
Loading...
