Appendix
Recovering Your Recovery Image Using Recovery and Utility
(for new hard drive or non-boot
able hard drive)
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.
Note: You will need the Boota ble disc and Recovery Image disc set for this recovery.
1. Power on your system. Wh en the Fujitsu logo appears on the scree n, press the
F12
key.
2. Insert the bootable disc i
n your DVD drive, then click OK.
3. Highlight the CD/DVD option from the Boot Menu and press
Enter
.
4. Select CD/DVD boot mo de:
Select UEFI Mode , if applicable and press
Enter
.
While the files are being l
oaded from the disc, t he Fujitsu logo screen app ears
followed by a progress b
ar at the bottom of the screen.
5. Choose your language, if necessary.
6. Three tool options app
ear: Diagnostics, Recovery and Utility. Select Recovery.
• Select Restoring the Factory Image (f ull hard drive recovery).
7. Click Next to confirm
full hard drive restoration. All data on the hard disk drive will be deleted.
8. Agree to the EULA by selecting the Agree option and clicking Next.
9. Click Next on the Re
covery Disc. Check screen to verify that th e bootable
disc has been inser
ted into the optical drive.
10. The Checking for Recovery Disc screen appears followed by the prompt to insert the
first disc. Click OK to continue. Repeat this step for all discs. After all recovery discs
have been checked an d the check has been completed, click Next.
11. Follow the prom
pt to reinsert the first recovery disc and click Next.
12. Click OK when you receive the final warning informing you that all data on hard
diskdrive C will be lost. This starts the recovery process.
13. Follow the pro
mpts to insert the next recovery discs and click OK.
14. After the copying of the image to the hard disk drive completes the restore
process is complete, click Finish to restart the system. The computer will restart
automatically and then go through the firstbootprocess.
Fujitsu 101
To Next Page
Loading...
