Connecting external d evices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor po rt, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see "
Key
combinations", Page 31, sect ion "Toggle output mon itor").
MonitorVGAconnection socketMonitorportMonitorport
Digital DisplayPort
Analogue VGA monitor port
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and th e external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on t he external monitor and then the notebook.
You can a lso switch between the ext ernal monitor and the LCD monitor of the
notebook, see chapter "
Key combinations", Page 31.
You can display the same p icture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
60 Fujitsu
To Next Page
Loading...
