Working with the notebook
Connecting the notebook to the Port Replicator
If you c onnect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The AC adapte r must b e connected to the Port Replicator w hen the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the Port Rep licator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Switch the notebook off.
► Remove the AC plug for the AC adapter from the power outlet.
► Disconnect the AC adapter cable from the DC socket (DC IN) of the notebook.
1
► Position
the notebook so that it is in line with the back edge of the Port Replicator.
► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
50 Fujitsu
To Next Page
Loading...
