Fujitsu lifebook e746 - Connecting the AC adapter to the Port Replicator; Switching on the notebook via the port replicator

Working with t he notebook
Connecting the AC adapter to the Port Rep licator
3
1
2
► Connect the power cable to the
AC adapter (1).
► Plug the power cable into the power
outlet (2).
► Connect the AC adapter cable to the DC
jack (DC IN) of the Port Replicator (3).
Power Outlets will vary from country to country, see chapter "When
travellin g in other c ountries ", Pa ge 19.
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This pro file will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the Power ON/OFF button on the port
replicator to switch the notebook on.

The pow er-on indicator of the Port
Replicator lights up.
Fujitsu 51