EasyManua.ls Logo

Fujitsu lifebook e746 - The notebook cannot be started; The notebook stops working

Fujitsu lifebook e746
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tro ubl eshooting and tips
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is not installed co
rrectly.
Check whether the battery is installed
correctly in its compartment.
Switch t he notebook on.
The battery is dead.
Charge the battery.
or
Insert a charged battery.
or
Connect the AC adapter to the notebook.
The power adapter is not connected correctly.
Check whether the AC adapter is connected
correctly to the noteboo k.
Switch t he notebook on.
The notebook stops w orking
NotebookEnergysaving mode
Cause Troubleshooting
Notebook is in energy saving mode. Leave energy saving mode.
An application program has cau sed the
malfunction.
Close the application program or restart
the notebook (by restarting the ope rating
system or switching the device off and back
on again).
The battery is dead.
Charge the battery.
or
Insert a charged battery.
or
Connect the AC adapter to the notebook.
The print
er does not print
Printerdoesnot print
Cause Tro ub lesh
ooting
The print
er is not switched on.
Make sure
that the printer is switched
on and re
ady for operation (refer to the
documen
tation supplied with the printer).
The pri
nter is not connected correctly.
Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty o r not correctly
installed, or it is the wrong printer driver.
Check that the data cable connecting
the notebook to the printer is properly
connected.
Check whether the correct printer driver is
loaded ( refer to the printer docum entation).
Fujitsu 79

Table of Contents

Other manuals for Fujitsu lifebook e746

Related product manuals