First-time setup of yo ur device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 17.
If your de vice is equipped with a Windows operating system, the necessary
hardware drivers and supplied so ftware are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the AC voltage
using the AC adapter, see "
AC ada pter connecting", Page 22. The AC adapter
must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on th e screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device w ith the necessary po wer. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e .g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the device
Should you discover any damage that occurred d uring transportation,
notify y our local sales outlet immediately!
► Unpack all th e individual parts.
PackagingTranspo rt
► Check your
device for any visible damage which m ay have occurred during tra nsp ortation.
You may n e
ed the packaging in the future, if you need to transport y our device.
Fujitsu 21
To Next Page
Loading...
