First-time setup of your device
Selecting a location
SelectingalocationDeviceACadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or th e AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This ca n block the air vents and cause overheating and damage.
• The underside of the device heats up during no rmal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please n ote that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 4 inches (100 m m ) away from the device and
its AC adapter to ensure adequate ventilation.
• Never cover the ventilation slots o f the device.
• Do not exp ose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
AC adapter connecting
Preparingforo perationACadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the r equireme nts of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to
the AC adapter.
► Plug the AC cab le (2) into a po w er outlet.
► Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
22 Fujitsu
To Next Page
Loading...
