Appendix
Installing the Software after the Recovery Image is Restored
Note: The following steps are need ed only if you restore the image from the
DVD Recovery Disc Set that yo u pu rchased.
Installation of essential access software
1. Insert the Bootable Disc in your DVD drive.
2. O pen the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, t he computer does not need the essential access software.
The recovery image already ha s the essential access software installed.
3. You can now connect to the internet and download FSDM (Fujitsu Software Download
Manager) from the support site an d download all the software applicable to the
model and OS using FSDM if they are not downloaded yet.
Auto Installation support for the software downloaded from support website
1. D ownload FSDM (Fujitsu Software Download Manager) from the sup- port site and down load all
the drivers applicable to the model and OS using FSDM if they are not downloaded yet.
2. W hen the software packages are downloaded from the web, it is importan t to
download the A uto Installer Software package and the model/language-specific
Readme file if you prefer to auto install the s oftware.
3. It is important t o have the extracted A uto Installer software package folder
and Readme file in the same location as other software folders. Otherwise
autoinstallation of the software will not be supported.
4. Inside th e Auto Installer soft ware package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User Account Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA i s displayed for the Fujitsu Software Auto Installer, accept
the EUL A, otherwise continue.
7. T h e Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software dow nloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to in stall the software in the order listed.
9. Click the Install button to start the installation.
10. Afte r installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. The You mu st restart the system for the settings to take effect. Do y ou wish to
reboot now? message app ears. Select Ye s .
12. T he system will now reboot.
Windows 10 Procedures
It is very important that yo u create your Recovery D rive before beginning to use your system.
It is also important that yo u create a backup of the content o f the C:\Drivers on your
system to w ritable media o r an external drive. System-Specific So ftware Drivers are
also available for download through the Fujitsu support site.
102 Fujitsu
To Next Page
Loading...
