Manufacturer’s no tes
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Reorient or relocate th e receiving antenna.
2. In crease t he distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from th e one the receiver is connected to.
4. C onsult the dealer or an experienced radio/TV technician for help.
Please note the following regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has bee n evaluated under FCC Bulletin OET 65C and found compliant with the
requirements as s et forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF
Exposure f rom radio frequency devices. The radiated output power of this radio device is far below
the F CC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during no rmal operation is minimized. When using this device, a
certain separation distance between antenna and nearby p ersons must be maintained to ensure RF
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).
Regulatory Notes and S tatem ents
Radio device, health and authorisatio n for use
Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile phones. Radio devices are safe for use by consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices may be restricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of rad io devices in specific environm ents is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operat ing th e equipment.
Regulatory Information/Disclaimers
Export restrictions
This product or s oftware contains encryption c ode w hich ma y not be exported or
transferred from t he US or Canada without an approved US Department of Commerce
export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B /
NMB 003 B. O peration is subject to the following two conditions:
(1) this device may not cause harmful interfere nce, and
(2) this device must accept any interference re ceived, including interference
that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu may invalidate the user’s
right to operate this equipment.
88 Fujitsu
To Next Page
Loading...
