First-time setup of your device Engl
ish - 13
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the de vice before setting it up. Follow
the instructions below when doing so :
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never p lace the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air v ents and cause o verheating and damage.
• The underside of the device heats u p during norma l operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of th e device may mark certain types of delicate surfa ces.
• Keep o ther objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. P ro tect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe th e safety precautions in the enclosed "Safety" m anual.
The supplied power cable conforms to the requirements of the co untry in
which you pu rchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Con nect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a m ains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu Technology Solutions 15
To Next Page
Loading...
