Removin g and installing components
during servicing English - 49
Attaching the c over
2
1
► Place the cover i
n the correct mounting position (1).
If you remove mo
re than one component at the same time, keep the screw s for the
individual co
mponents separately from each o the r and make sure that you use th e
correct screw
s. If you install the wrong screws, components may be damaged.
► Tighten the screw (2).
► Insert the battery (see Chapter "
Inserting battery", Page 27 - Englis h).
Fujitsu Technology Solutions 51
To Next Page
Loading...
