Working with the notebook English - 3
3
Switching the wireless components on and off
► Press the key combination
Fn
+
F5
to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.
Pay attention to th e additional safety notes for devices with wireless
components provided in the " Safety" manual.
Details on using a Wireless LAN c an be found in the online help system
included in the W ireless LAN software.
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Informatio n on configuring the WLAN access can be found in the
documentation for your operating system.
Ethernet and LAN
EthernetLAN
The internal network module of your not ebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Ne twork).
2
1
► Connect the network cable to the LAN
port of the no tebook (1).
► Con nect the n
etwork ca ble to your
network conn
ection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery s co pe. This type of
cable can be obtained from a specialist dealer.
Fujitsu Technology Solutions 35
To Next Page
Loading...
