Removin g and installing components
during servicing English - 47
Removing a hard disk
1
1
3
2
► Remove the screw
s(1).
Keep the screws
in a safe place. If you are removing m ore than one component at
the sa me time,
store the screws for the individual c omponen ts separate from each
other. If you i
nstall the wrong screws, components may be damaged.
► Use the pulling aid to pull the hard disk in the direction o f the arrow (2) until the contacts disen gage.
► Remove the hard disk from the hard disk compartment (3).
Fujitsu Technology Solutions 49
To Next Page
Loading...
