Removin g and installing components
during servicing English - 51
Installing the optical drive
2
1
2
► Slidethedrivei
nto the notebook (1).
► Fasten the screw s (2).
► Complete the r
emoval, see "
Finishing component removal", Page 51 - English.
Finishing component removal
After you have r emoved or changed the system components as you required, please
prepare your de vice for operation again as follows:
► Install the battery again (see "
Inserting battery", Page 27 - English).
► Turn the no
tebook the right way up again and place it on a flat surface.
► Reconnect the cables that you d isco nnected before.
Fujitsu Technology Solutions 53
To Next Page
Loading...
