14 - English First-time setup of your
device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless com ponents: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied softw are is
installed and configured. Because this procedure must not be interrupted,
you should set aside eno ugh time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, D O NOT restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► D uring instal
lation, follow the instructions on screen.
If a Windows o
perating system is inst alled on your device, you will find more
information
on the system and drivers, help pro grammes, updates, manuals etc.
on the devic
e or on the Internet at "
http://ts.fujitsu.com/support".
16 Fujitsu Technology Solutions
To Next Page
Loading...
