Ports and operating elem en ts
Removing and installing the bat
tery
NotesBattery
Only use batteries approved by Fujitsu Siemens Computers for your notebook.
Never use force when inserting or removing a batte ry.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power p lug out of the mains socket.
Battery
► Close the LCD screen so that it locks i
nto place.
► Disconnect all cables connected to the notebook.
► Turn your notebook ove r and place it on
a stable, flat a nd clean surface. If n ecessary, lay
an anti-slip cloth on this surface to p
revent the notebook from being scratched.
1
1
2
► Push the clips (1) in the direction indicated
by the arrows, and keep them pressed.
► Remove the battery from the battery
compartment (2).
Installing the battery
1
► Push the battery into the batt
ery
compartment until it engages
(1).
Battery
A26391-K198-Z121-1 -7619 , edition 2 17
To Next Page
Loading...
