Ports and op erati ng eleme nts
Radio components: UMTS (optional)/
wireless LAN/Bluetooth
Wireless LANBluetoothUMTS
The installation of a wireless LAN, Bluetooth or UMTS module not approved by Fujitsu
Siemens Computers GmbH voids th e permits (CE!, FCC) issued for this device.
The modules for radio components are switched off during shipping.
Switching the radio components on and off
► Slide the O N/O FF switch into the "ON"
position to activate the radio components.
Wireless LANWireless LANBluetoothBl ue tooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the radio components.
You can also deactivate the wireless components individually in the BIOS Setup.You
must have assigned the supervisor password in order for this function to be available.
Pay attention to the additional safet y notes for d evices with radio
components provided in the "Safety" manual.
Details on using Wireless LAN can be found the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
24 A26391-K198-Z121-1-7619, edition 2
To Next Page
Loading...
Need help?
General