Ports and op erati ng eleme nts
PC cards
PCcardCar dBus,see PCcardPCMCIA,seePC c ardPCCard,see PCCard
A PC card slot (CardBus or PCMCIA) enables the notebook to operate a type II PC card.
Consult the documentation supplied by the PC card manufacturer
and fo llow the instructions provided.
Never use force when inserting or removing a PC card.
The PC card slot may be protected w
ith a placeholder that must be
removed before using the slot.
Keep the placeholder in a s afe pla
ce. If yo u later remove the PC card you sh ould also refit
the placeholder in the empty slot
. Th is prevents foreign matter from getting into the slot.
Please see the documentation relating to the card for driver installation instructions.
You should also read the help files on the supplied CD , the information provided
with the drivers fo r the card, or the information provided with the operating syste m
(e. g. Help and Support Center in Windows XP).
Inserting a PC card
1
► Push the P C card release mechanism i n
the direction indicated by the arrow (1) until
the placeholder for the PC card comes
out of the notebook slightly.
► Pull the placeholder f or the PC
card (2 ) out of the slot.
PCcard
► Ins e rt the PC card, c ontacts first,
into the slot guide.
► Gently push the PC card into the slot
until you feel it click into place.
20 A26391-K198-Z121-1-7619, edition 2
To Next Page
Loading...
Need help?
General