Working with the noteboo k
Connecting the notebook to the Port R eplicator
If yo u connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforeha nd.
The mains adapter must b e connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the not ebook is not operated with the LCD screen closed when
the notebook is connected to the Port Rep licator. The resulting overheating can
cause reduced performance and increased activity of the integrate d fan.
PortReplicator
► Switch the notebook off.
► Remove the mains plug for the mains adapter from the mains socket.
► Disconnect the mains adapter cable from the D C socket (DC IN) of the note book.
1
► Position the notebook so that it is in line with the back edge of the Port Replicator.
► Place the notebook o nto the Port Replicator (1) and ensure that it locks into place correctly.
46 Fujitsu Technology Solutions
To Next Page
Loading...
