Removing and inst alling components
during servicing
Attaching the cover
2
1
2
► Place the cover i
n the correct m ou nting position (1).
► Fasten the screws (2).
Finishing component removal
After you hav
e removed or changed the syst em c omponen ts as you required, please
prepare your
device for operation again as follows:
► Install the
battery again (see "
Installing a battery", Page 32).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect
the cables that you disconnected before.
Fujitsu Technology Solutions 67
To Next Page
Loading...
