Removing and inst alling components
during servicing
Removing a cover
► Prepare for removal, see "Prep aring to remove com ponents", P age 62.
1
2
1
► Remove the screws (1).
Keep the screws in a safe place. If you are re moving more than one component at
the same time, store the screws for the individual components separate from each
other. If you install the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing mem
ory modules
3
2
1
1
► Carefully push the two moun ting
clips outwards (1).
MemoryexpansionMemorymodule
The memory
module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
Fujitsu Technology Solutions 63
To Next Page
Loading...
