16
Chapter 4 Checking the Network Connection
This section describes how to check the status of the
network connection.
The network connection can be checked by using [Ping]
on the administrator window.
1. Log in to the scanner with the user name and
password of the administrator.
Enter "admin" for [User Name] and the password
specified in the basic settings for [Password]. The
default password is "password".
The administrator window appears.
2. Select [Ping] under [Check Network Status] in
the menu, and check the status of the network
connection on the [Ping] window.
For [Address], enter the IP address, host name, or
FQDN of the computer to be checked.
3. Press the [Ping] button.
A ping test is performed and the results are
displayed.
For details about the results, refer to "Checking
Basic Network Operation with a Ping Test" (page
18).
4. Press the [Logout] button to log out of the
scanner.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
