Operation
Changing the monitor settings
When pu tting the monitor into operation for the first time, the screen display should
be optimally adapted to the display ada pter used.
Changing the monitor setti
ngs with the butto ns
of the control panel
The buttons of the control panel have two functions. If the OSD menu is
activated, a description of the current function of the buttons is displayed
directly above the buttons at the edge of the screen. If the OSD menu is not
activated, you can make the following settings directly:
123
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch
3 = Power supply indicato r
Select OSD language
If one of
the buttons is being pressed for the firsttimefortheOSDmenu,the
selecti
on screen for the language is displayed:
► Press the
ECO
/ or the
INPUT
/ button to select the required languag e.
► Press the
MENU
/ button to confirm your entries or the
AUTO
/
button to can cel the process.
After selecting the OSD language for the first time, you can change
it at any time in the OS D.
Performing auto-adjustment of the monitor
► P
ress the
AUTO
/ button for about 1 second.
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
20 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General