Operation
Adjusting the brightness and contrast
Call up th e Brightness/Contrast setting window
Brightness
Set the brightness of the display
With th is function you ch ange the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark c olour tones.
Auto Brightness
Automatic brightness control
This function is used to automatic ally control the brightness of the
background lighting using the light sensor.
On = T he brightness is adjusted acco rding to the ambient brightness
Off = The brightness is adjusted manually by the user
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the cont rast is set too low, the maximum brightness will not be achieved.
Selecting the application mode
Call up the Mo
de setting window
D mode
Setting for
DICOM simulation (the values for colour a nd ACR are locked:
Colour = 75
00K, ACR = off)
Office
Office presets (the settings for colour and sharpness canbeadjusted)
Photo
Photo presets ( colour, sharpness, sat uration, ACR)
Video
Video pr
esets (colour, sharpness, saturation, ACR)
ACR = Dynamic contrast (on / off)
Fujitsu Technology Solutions 25
Downloaded from ManualMonitor.com Manuals