Operation
Setting functions
Call up the Setup settings window
Input select
Select the input signal
This function is u sed to select the input signal (VGA , DVI or DP).
This is on condition tha t the display a dapter supports this function.
Language
Set the language for the OSD m enu
With this function you select the language for the OSD m enu.
The defa ult setting is English.
DDC-CI
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default s etting)
Off = The DDC-CI function is deactivated
OSDTimeout
Set the display du ration of the OSD menu
With this function you s elect a value from 10 to 120 seconds.
If the set time expires without a setting be ing made, the O SD menu is
automatically faded out.
Factory recall
Activate the factory settings
With this function all settings are reset to the factory settin gs w ithout
prompting for confirmation.
The function is executed with the
button. If you are using a VGA data
cable, an Auto Processing message is displayed. The language selection
menu appears.
Displaying information
Call the In formation setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are displayed.
Fujitsu Technology Solutions 27
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General