Important notes
Transporting the device
Device,Transpo rtationRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects the m from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a c old environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleanin g agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface
of the device is sensitive to pressure and scra tches. Clean
it only using a soft
, slightly moistened cloth.
The surface of the c
asing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistene
d in mild domestic detergent and then carefully w rung out.
CE marking
The shipped ve rsion of this d evice complies w ith the requirements of EU directives 2014/30/EC
"Electromagnetic compatibility", 2014/35/EC "Low voltage directive", 2009/12 5/EC "Ecodesign
directive" and 2011/ 65/EC "RoHS directive".
Fujitsu 9
To Next Page
Loading...
