Operation
Activate/deactivate ECO o perating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
button to switch ECO operating mode on or off.
The message ECO Mode on or ECO Mode off is displayed.
If ECO mode is active, a brightness is used that is the optimum from both
the e rgono mic and ecological aspects.
If the brightness is further reduced by the user, this new setting is used during
the next call of the ECO operating mode.
After the ECO ope rating mode is switched off, the brightness previously set by the user is restored.
Selecting the input signal
INPUT
VGA
HDMI
DisplayPort
USB-C
► Press the button to open the INPUT setting window.
► Press the
/ butt on to select the desired monitor port.
► Press the
buttontoconfirm the selected monitor port or to clos e
the window without ma king any changes.
In the f
ollowing cases an automatic change of the input signal is disabled:
• When t
he "Daisy-Chain" function is activated.
• When the input signal to the "USB-C" monitor port is chosen.
Pres
sthe
button to call up the INPUT settings window if the m onitor
is no
t displaying an image and is in sleep mode
28 Fujitsu
To Next Page
Loading...
