2.2 Connecting the ScanSnap to your PC
ScanSnap S510 Operator's Guide 27
Connecting the ScanSnap
2
2) The "User Account Control" dialog box appears; click the [continue] button.
3) The "Windows Security" message appears; select "Install this driver software
anyway."
⇒ The ScanSnap is added as a new hardware device.
ATTENTION
It may take some time for the ScanSnap Manager icon on the taskbar to
become the ready status.
Press the [POWER] button on the ScanSnap when the icon appears
in not-ready status.
When you turn on/off the ScanSnap, wait for five seconds.
S
S
S
S
To Next Page
Loading...
